FREE SHIPPING TO ALL 🇺🇸!

Load image into Gallery viewer, TPMS System Booster & Signal Amplifier for Truck RV GUTA
Load image into Gallery viewer, TPMS System Booster & Signal Amplifier for Truck RV GUTA

TPMS System Booster & Signal Amplifier for Truck RV

Vendor GUTA
Regular price $57.99
Sale price $57.99 Regular price
Sale Sold out
Unit price
/per 
In stock and ready for shipping
This is a pre order item. We will ship it when it comes in stock.

Free Shipping from US 2-7 Working Days Arrive

24/7 Lifetime Customer Support Center

2-Years Quality Assurance

  • Repeater Function - The GUTA repeater is used to amplify the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals.
  • Repeater Compatibility – GUTA repeater has 433.92 MHz working frequency. The signal booster will ONLY match to GUTA TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor.
  • Repeater Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage.
  • Repeater Installation - It's small and easy to install, which is suggested to install near the rear axle.
  • Repeater Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice.
Description
  • Repeater Function - The GUTA repeater is used to amplify the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals.
  • Repeater Compatibility – GUTA repeater has 433.92 MHz working frequency. The signal booster will ONLY match to GUTA TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor.
  • Repeater Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage.
  • Repeater Installation - It's small and easy to install, which is suggested to install near the rear axle.
  • Repeater Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice.
FAQs
NOTE BEFORE USE

FAQs

How to connect the sensor and display?

In the process of matching the TPMS sensor and the TPMS monitor, please press the CODE button of the device and wait until the beep sound, then release, then you can get into the ID matching mode. (If release the code button before the device starts beeping, you could not into the ID matching mode.)

Why can't I see the data when the vehicle is stationary?

After you have parked for a period of time, you may find that the monitor does not display data. That is because it has entered the sleep power-saving mode. When the vehicle is stationary, you will find that even if you turn on the display, the sensor data cannot be read. This is because the sensor needs to be activated by the vehicle moving and the repeater is in a power-off state in the stationary state. If you want to check tire pressure and temperature data, please restart your vehicle to activate the sensors and repeaters. (Note: The power of the repeater comes from the automotive battery)

 If there is a puncture accident?

Tire pressure monitoring system could not avoid the puncture caused by sharp objects or damaged tires. Because tire pressure monitoring system can only monitor the air pressure and temperature over a period of time, but cannot monitor instantaneous changes. So it is only suitable for avoiding tire abnormalities caused by changes in air pressure or temperature, which occur slowly, not instantaneously.