- 🚗Function - The repeater is used to enhance the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals.
- 🚙Compatibility - repeater has 433.92 MHz working frequency. The signal booster will ONLY match to TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor which the distance is over 36 ft.
- 🚌Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage
- 🚕Installation - It's small and easy to install, which is suggested to install at the rear axle.Most RV they will have a place for the battery tank,the signal booster can be installed in the battery tank, so the booster power lines can direct connect with the battery.
- 🚚 Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice.
1. Entering Programming Mode:
- To enter Learning Mode, press and hold the CODE button on the monitor until you hear a beep, then release. Releasing too early will prevent entry into Learning Mode.
2. Why No Data Displays When Stationary:
- The monitor may enter power-saving mode after being stationary. Press any button or create vibration to wake it.
- If sensor data is still missing, the repeater may not be powered. The repeater relies on the vehicle’s battery, so restart the vehicle to reactivate the repeater.
3. Limitations of Puncture Prevention:
- The TPMS cannot prevent punctures caused by sharp objects or tire damage. It monitors gradual changes in pressure and temperature but cannot detect sudden events. Regular tire inspections are essential, and faulty tires should be replaced promptly.
Friendly Reminder: Conduct a full tire inspection at least once a month with a professional technician for optimal safety.
- 🚗Function - The repeater is used to enhance the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals.
- 🚙Compatibility - repeater has 433.92 MHz working frequency. The signal booster will ONLY match to TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor which the distance is over 36 ft.
- 🚌Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage
- 🚕Installation - It's small and easy to install, which is suggested to install at the rear axle.Most RV they will have a place for the battery tank,the signal booster can be installed in the battery tank, so the booster power lines can direct connect with the battery.
- 🚚 Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice.
1. Entering Programming Mode:
- To enter Learning Mode, press and hold the CODE button on the monitor until you hear a beep, then release. Releasing too early will prevent entry into Learning Mode.
2. Why No Data Displays When Stationary:
- The monitor may enter power-saving mode after being stationary. Press any button or create vibration to wake it.
- If sensor data is still missing, the repeater may not be powered. The repeater relies on the vehicle’s battery, so restart the vehicle to reactivate the repeater.
3. Limitations of Puncture Prevention:
- The TPMS cannot prevent punctures caused by sharp objects or tire damage. It monitors gradual changes in pressure and temperature but cannot detect sudden events. Regular tire inspections are essential, and faulty tires should be replaced promptly.
Friendly Reminder: Conduct a full tire inspection at least once a month with a professional technician for optimal safety.