- Repeater / Signal Booster Function – The GUTA GB30 repeater enhances sensor signal transmission to the monitor, in the situation that length or electronic interference prevent your monitor from receiving sensor signals
- Repeater Compatibility – GUTA GB30 repeater has 433.92 MHz working frequency. The signal booster will ONLY match to the GUTA ALL TPMS Tire Pressure Monitoring System. With a repeater, it increases the signal from the transmitters to the TPMS monitor
- Repeater Installation - Easy to install, which is suggested to install near the rear axle. Kindly reminder: Repeaters can be installed inside of vehicle first. If the signal is not enhanced, please install the repeater outside the vehicle
-
Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage. 3 pcs AAA batteries are included
1. Entering Programming Mode:
- To enter Learning Mode, press and hold the CODE button on the monitor until you hear a beep, then release. Releasing too early will prevent entry into Learning Mode.
2. Why No Data Displays When Stationary:
- The monitor may enter power-saving mode after being stationary. Press any button or create vibration to wake it.
- If sensor data is still missing, the repeater may not be powered. The repeater relies on the vehicle’s battery, so restart the vehicle to reactivate the repeater.
3. Limitations of Puncture Prevention:
- The TPMS cannot prevent punctures caused by sharp objects or tire damage. It monitors gradual changes in pressure and temperature but cannot detect sudden events. Regular tire inspections are essential, and faulty tires should be replaced promptly.
Friendly Reminder: Conduct a full tire inspection at least once a month with a professional technician for optimal safety.
- Repeater / Signal Booster Function – The GUTA GB30 repeater enhances sensor signal transmission to the monitor, in the situation that length or electronic interference prevent your monitor from receiving sensor signals
- Repeater Compatibility – GUTA GB30 repeater has 433.92 MHz working frequency. The signal booster will ONLY match to the GUTA ALL TPMS Tire Pressure Monitoring System. With a repeater, it increases the signal from the transmitters to the TPMS monitor
- Repeater Installation - Easy to install, which is suggested to install near the rear axle. Kindly reminder: Repeaters can be installed inside of vehicle first. If the signal is not enhanced, please install the repeater outside the vehicle
-
Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage. 3 pcs AAA batteries are included
1. Entering Programming Mode:
- To enter Learning Mode, press and hold the CODE button on the monitor until you hear a beep, then release. Releasing too early will prevent entry into Learning Mode.
2. Why No Data Displays When Stationary:
- The monitor may enter power-saving mode after being stationary. Press any button or create vibration to wake it.
- If sensor data is still missing, the repeater may not be powered. The repeater relies on the vehicle’s battery, so restart the vehicle to reactivate the repeater.
3. Limitations of Puncture Prevention:
- The TPMS cannot prevent punctures caused by sharp objects or tire damage. It monitors gradual changes in pressure and temperature but cannot detect sudden events. Regular tire inspections are essential, and faulty tires should be replaced promptly.
Friendly Reminder: Conduct a full tire inspection at least once a month with a professional technician for optimal safety.